With just the push of a button, Bissell SpotBot Pet delivers hands-free spot and stain removal on carpets and area rugs. Equipped with two preset cleaning cycles, this easy-to-use portable carpet cleaner automatically sprays, brushes, and suctions to remove both surface pet stains and tough, set-in stains.
Contents
Who makes the SpotBot?
BISSELL BISSELL SpotBot Pet Portable Carpet Cleaner 33N8A.
How do you use a Bissell carpet cleaner SpotBot?
Why is my Bissell SpotBot leaking?
How do you use a SpotBot hose?
Remove the Tough Stain Brush from the back of the unit, then attach it onto the grip of the hose. Press the spray trigger button to spray the soiled area, then slowly move tool back and forth over the area. Release the trigger to suck up the dirty solution. Work in small sections until the area is clean.
How do you use a Bissell SpotBot 1200?
How do you remove a hose from a SpotBot?
How do you fill a Bissell SpotBot?
How do you replace the hose on a Bissell Spotclean?
Why is my Hoover vacuum leaking water?
When water begins to leak from your Hoover Steam Vac you may have a bad valve seal. A bad valve seal can be replaced with a new part to fix the problem. … You can replace the valve seal on your Hoover Steam Vac by first obtaining a replacement valve for your specific model of cleaner.
Why is my Hoover Smartwash leaking water?
I called Hoover Customer Care. They said it is normal for it to initially leak out of the back when you first put in the tank because there is an overflow hole from where the clean water tank sits so it won’t flow into the motor. The gasket is supposed to provide a seal to stop it from constantly leaking.
How do you empty a SpotBot?
Empty and rinse the dirty water/collection tank after each use or when the dirty water tank reaches the indicated maximum fill line. To remove the tank, lift up the dirty tank latch and pull the tank out. Dump out the dirty water and rinse out the tank.
How do you clean a SpotBot?
Put a dilute bleach water mixture in the clean water resevoir, let the spot bot scrub in your tub for a while, then do a few pure water flushes through the bot. It will be loud and annoying but it gets the job done.
How do you clean a SpotBot nozzle?
NOTE: In manual mode, the SpotBot is equipped with a safety feature which will shut the unit off after 30 minutes. Periodically clean out the black valve inside of the dirty water/collection tank. When the cleaning is complete, lightly drag the suction nozzle across the stain without pressing the trigger.
Why is my little green machine leaking?
Leaking From the Bottom You’ll need to make sure the collection tank is locked into place, just as if the leak was above the collection tank. If you’re still having issues, it’s likely due to the ball valve on the bottom of the tank.
Is Bissell a Canadian company?
Bissell Inc., also known as Bissell Homecare, is an American privately owned vacuum cleaner and floor care product manufacturing corporation headquartered in Walker, Michigan in Greater Grand Rapids.
How do you clean a little Green Machine Head?
Answer: The brush head detaches from the hose. I clean it by running extremely hot water through it. You could even soak it in a warm water bath if needed.
How much Bissell cleaner do I use?
Mix 2 1/2 ounces of the Bissell concentrated carpet cleaner for every gallon of hot water your rental machine holds. Pour into the machine’s designated tank. This method also works for older Bissell models that do not have the Smartmix option.
Can I use Bissell upright cleaner in my SpotBot?
what can I use in the Spot bot portable machine? 1 of 2 found this helpful. Do you? ANSWER: It is not recommended that you use any upright cleaning formulas in portable machines.
How much is the Bissell formula?
Add 2 oz of BISSELL 2X Formula to the tank Measure 4 oz (2 capfuls) and pour into tank. Fill the clean water/solution tank with hot (not boiling) tap water to the WATER fill line Add formula to the indicated fill line (approximately 0.5 oz) on the solution tank.
