Pull the paper out manually if the switch-toggling fails to clear the jam. Oil the shredder if jams repeat. … Move the power switch to the Auto position or the Forward position for five seconds if the shredder will only function in reverse. The shredder may be blocked and this will clear any blockage.
How do you reset a Fellowes shredder?
b) The shredder may need to be reset. Switch it to the reverse (R) position for 2 seconds and then back to auto (I). This should reset it and it will operate again.
What does the red light on a shredder mean?
Yes, the RED LIGHT comes on when you separate the SHREDDING HEAD from the bucket. When you put the SHREDDING HEAD back into place after emptying the bucket, the RED LIGHT goes off. If you shredder is not shredding, is there a chance that you have overheated the unit.
How do you unlock Fellowes shredder?
NOTE: To unlock: press lock icon and re-enter previously set 4-digit lock combination. In case of a power outage, SmartLock will remain engaged. Once power is restored, shred cycle will automatically resume. If shredder misfeeds or jams, the shredder will unlock after 30 minutes.
What do you do when your paper shredder stops working?
How to unjam a shredder
- Unplug the shredder. This is the first and most important part of any attempt at fixing a paper jam. …
- Empty the wastebasket. …
- Switch to reverse. …
- If the shredder jams in reverse switch back to auto/forward. …
- Reduce the thickness of your load before re-shredding.
Where is the sensor on a shredder?
On small shredders, the sensor is normally a mechanical sensor, which looks like a plastic bar or lever in the very center of the mouth of the shredder, (Where you normally insert the paper). When shredding small documents, such as checks or receipts, be sure that you are inserting the paper directly over this sensor.
How do you service a Fellowes shredder?
Can you reset a paper shredder?
If you have been continuously shredding for an extended period of time, the unit may have overheated and the thermal protection feature has been activated to shut off the machine. If this happens, switch off the unit for at least 30 minutes/1 hour for it to reset before continuing.
How do you reset an overheated shredder?
Wait even longer than the minimum recommend duty cycle if your machine heats up to the point where it stops working. Aurora, another shredder manufacturer, suggests waiting 30 minutes to an hour between overheated shredding cycles to allow it to fully reset.
How do you fix a paper jam in a Fellowes shredder?
This is typically located on the top of the shredder.
- Set the switch to reverse mode or press and hold the reverse button for 2-3 seconds allowing the machine to work the jammed paper out.
- As the shredder is reversing, gently pull the uncut portion of the paper from the machine.
- Resume shredding once the jam is cleared.
How do you clear a paper jam in a Fellowes shredder?
If your shredder is jammed, press the reverse button for two seconds. As the shredder reverses the paper, gently pull out the uncut portion. If reversing the paper does not unclog the jam, try toggling between reverse and auto forward for two seconds each. This will help to clear the paper from the blades.
How long does it take for a Fellowes shredder to cool down?
1) The shredder has exceeded the maximum continuous run time and requires a cool-down time. Wait 30-60 minutes to allow the shredder to cool off and try to shred again. (The shredder may cool down sooner and begin to work again.) 2) The shredder is jammed.
How do you clean a shredder sensor?
Once you locate the sensors, use a cotton swab dampened with rubbing alcohol to wipe away any residue or dust. You may need to clean it a couple of times. Also if there is any visible paper debris in this area, remove with cotton swab or needle nosed pliers.
Can you use wd40 on a paper shredder?
The answer is no. This product is not designed to lubricate a shredder head properly. Like other oils, such as vegetable or canola, WD-40 would cause the paper to stick together, inevitably gumming up and jamming the machine.
What kind of oil do you use for a paper shredder?
Use only vegetable-based oils like Fellowes Shredder Oil for all cross-cut paper shredders. Also use High Security Shredder Oil for large capacity paper shredders and Fellowes commercial shredders with the Auto-Oil feature.
Why do paper shredders stop working?
2 Answers. It is possible that you unit has overheated. If you have been shredding papers for a long period of time or have been inserting large amounts of paper then your device may have overheated. Turn off your device and let it cool down for 30 minutes before attempting to use it again.
What is the best way to lubricate a paper shredder?
Should shredders be oiled?
All paper shredders need to be oiled because paper dust builds up inside the cutting assembly. As a guide, oil your cross-cut shredder every 1/2 hour of shredding time.
How do you fix a shredder sensor?
Why won’t my shredder stop running?
This can happen when oil, paper dust, or debris covers the sensors. Covered-up sensors essentially tell the shredder that paper has entered it, thus causing it to continuously run. … First, unplug your shredder. Then look for the sensors in the paper entry area.
Why is my shredder making a weird noise?
If your shredder is jammed or clogged, it may present with these symptoms: Not fully shredding the paper. Getting stuck in the reverse function. Making strange grinding or high pitch noises.
Can you repair a Fellowes shredder?
Many of the Fellowes personal shredders (small shredders that can fit under a desk) are repairable and will have parts available. … Please do not try to repair the shredder yourself or you will void your warranty.
Can you use wax paper to lubricate shredder?
You can get wax paper from almost anywhere, and it is a nice alternative to oil. Just run the wax paper through your shredder as you would normal paper. Depending on the frequency, one or two sheets will help to lubricate the cutting cylinders.
Can I use olive oil to lubricate my paper shredder?
Dry oil, vegetable oil, shredder oil, 3-in-1, etc. If you use vegetable oil don’t pour straight from the bottle as you will pour too much. Use a Tablespoon at a time and gradually work your way across the shredder until you have a fine coat. … I have the 12 page cross cut and I use olive oil about every 6 months or so.
How do you Unjamm a shredder?
Switch the shredder to reverse and plug it back in. Because jamming is a common problem, most modern shredders come with a built-in option to run in reverse. Switch the shredder to its reverse option (usually there is a well-marked button on the top of the shredder) before plugging it back in.
What is a duty cycle on a shredder?
Duty CycleThe maximum length of time the shredder will operate for before it needs to cool down.
What causes a shredder to overheat?
Overheating a Fellowes home use shredder is most likely to arise when shredding stored documents which have accumulated, where just too much volume needs to be shredded over one session. Your shredder may also be overheating more easily if the blades have not been oiled enough, so try oiling your shredder blades.
