What size should a bar top be?

16 wide The main bar top surface should be at least 16 wide and can be as wide as 20 or more depending on the space available but enough space should be provided for a dinner plate, pan of pizza and some drinks.

What is a standard bar depth?

A standard size bar is usually 42 inches high and 16 to 29 inches deep. The bar overhang ranges from 8 to 12 inches, which is typically determined by preferred leg room.

How much overhang do you need for a bar top?

A typical overhang for a comfortable seating area should be around 25-30cm (10-12), this should leave enough knee room and adequate space between the countertop edge and the person seated. Therefore, as the depth of the overhang increases, so does the comfort and usability of the bar.

What is the standard width of a kitchen bar top?

Most homes are fitted with kitchen countertops that measure 25.5 inches in width (from the wall to the edge of the counter), with some measuring up to 28 inches. Standard measurements allow for a 1.5-inch overhang over 24-inch deep base cabinets.

How deep is a home bar?

When coming up with the design for your bar, keep in mind that the average home bar is 42 inches high and 24 inches deep.

Is 45 inches too high for a bar?

Commercial Bars They should measure between 42 to 45 inches. In this case, you should consider the average height of both males and females, which is 5 feet, 4 inches. This is equivalent to 64.8 inches, which makes 42 -45 inches perfect for a commercial bar setting.

How much should a countertop overhang?

Generally, the standard overhang of a countertop is 1 to 1 inches from the cabinet, while the exposed ends of a countertop will usually have a inch overhang, and the ends that meet a wall don’t have any overhang at all to keep the fit flush to the wall.

How much space should be between bar and wall?

Allow at least 36 inches between the bar and the back bar or wall. This is a bare minimum to allow a single bartender space. If constructing a large bar, where it is possible more than one person will be behind the bar, allow more space.

How high should a bar be built?

42 inches The standard height for a bar in the United States is 42 inches. This is the perfect height for a 30 inch bar stool. You want 12 inches of clearance between the top of the bar stool and the top of the bar.

How far can a countertop overhang without support?

Different countertop materials have different requirements. Solid Surface countertops can overhang 6 inches without additional support (e.g. plywood decking). 3 cm Quartz (engineered stone) can handle a 14 inch overhangs and 3 cm Granite overhangs should not exceed a 10 inch overhang without additional support.

How thick is a countertop?

The industry standard thickness for kitchen, bathroom, and other countertop surfaces in natural stone is 1.25 inches. This thickness provides the strength and stability required to create an unbroken surface without the need for stabilizing it with a plywood backing.

How much should a countertop overhang on an island?

The standard overhang of an island countertop — on the side designed to sit at and tuck stools underneath — is 12 inches. If you plan to extend the counter farther, you need to add supports such as legs, or wood corbels or metal L-brackets that extend half the overhang’s distance.

How deep is a breakfast bar overhang?

The overhang of your breakfast bar should be between 8 inches and 15 inches. This measurement depends on the amount of space you have available to dedicate to your breakfast bar, the height of the people using it, and the type of material you are using for the counter.

How long should a bar be for 3 stools?

In order to determine how many stools will fit at your kitchen island, home experts recommend you allow 28 to 30 inches for each seating space, which means you can divide the length of your island’s counter by 30 to to figure out how many stools will comfortably fit.

How small can a breakfast bar be?

When it comes to a breakfast bar overhang, the standard size for this should be 18 inches to allow for enough leg room. A place where many will gather for coffee, meals and endless conversations, you need your breakfast bar to cater for all kinds of occasions.

What are bar frauds?

This practice may occur when staff members are allowed to make corrections on the checks without supervision. The customers may be charged for merchandise not received. Or higher prices may be entered on the check.

IS 48 in high for bar top?

The average bar table is 42 inches high and takes a 30- to 32-inch stool. The typical counter-height table is 36 inches high. … Extra-tall bars can be high as 48 inches. You need stools with seat heights between 34 and 36 inches to sit comfortably.

How tall is a barstool?

Bar stool height: Bar tops are usually around 40 to 42 inches high, so opt for a bar stool about 28 to 30 inches tall.

What are standard bar dimensions?

Home bars and commercial bars differ, of course. Home bars are much smaller and tend to be between 12 and 20 wide. A commercial bar is usually 20 to 30 wide, and that includes the drink rail on the bartender’s side.

What is bar height countertop?

A bar-height table generally measures in the 40- to 42-inch height range. A counter-height table runs about 34 to 36 inches tall, and standard dining-height tables range from 28 to 30 inches tall.

Is 12 inch overhang enough?

According to Atlantic Shopping, if you want to be able to eat at your kitchen island, you’ll need at least 12 inches of overhang to make adequate knee space. It’s also important to remember than an overhang of over 12 inches requires support to make it sturdy enough to lean on and eat off of.

How much should a counter overhang for stools?

Stools for raised 42-inch countertops are usually between 28 and 30 inches tall, giving a comfortable 12 to 14 inches of knee room. The recommended counter overhang also varies with the counter height, with experts suggesting 15 to 18 inches for the lower counter and 12 inches for a raised counter.

What kind of wood should I use for a bar top?

Many experienced woodworkers consider walnut to be the best wood for bar tops due to its shock resistance and range of colors. Walnut can be golden, honey colored or medium to dark brown. Walnut bar tops can be satin-smooth with a muted grain or conversation pieces with prominent textures and knotholes.

How deep is a bar water?

Water Resistance Terminology One atmosphere = 10 meters. Bar: An alternative term for atmosphere. A watch that’s 20 bar water resistant is strong enough to withstand water pressures on a par with a depth of 200 meters.

How do you build a bar top?