8 Types of Jewelry Clasps and How to Use ‘Em
- Spring Ring Clasp. …
- Lobster Clasp. …
- Barrel Clasp. …
- Toggle Clasp. …
- Magnetic Clasp. …
- S Hook Clasp. …
- Fishhook Clasp. …
- Slide Lock Clasp.
Contents
What is the lock on a bracelet called?
Figure 8 Safety A figure 8 safety is a hinged safety lock with a cinched middle that clips over a button. A figure 8 safety is used to either supplement a clasp or to keep a hinged bangle bracelet closed.
What is clasp in jewelry?
One of the most underappreciated features of a piece of jewelry is its clasp. A jewelry clasp, or jewelry fastener, is the mechanism that allows a necklace or bracelet to easily be put on and taken off without causing any damage.
What is the most secure necklace clasp?
In general, the most secure clasps are the lobster, hook and spring ring clasps, which are used for most necklaces and bracelets.
What is a parrot clasp?
A lobster clasp also known as a lobster hook, or parrot clasp, it is a fastener that is held closed by a spring. The lobster clasp is opened or closed by holding a small lever, usually with a fingernail, long enough to apply, then it is attached (or removed from) a short link-chain, end tag or a ring.
What is a lobster clasp on a necklace?
A lobster clasp, also known as a lobster hook, is a fastener that is held closed by a spring. … Lobster clasps are often used for necklaces, bracelets, and keychains. Lobster clasps are named as such because of their pinching mechanism, and they are often shaped like a lobster’s claw.
What are necklace connectors called?
The Clasp – This part of the necklace is what keeps it all together and in tact. The fastening piece can either be a clasp, spring ring, or hook and eye fastener that keeps the chain connected.
What is a spring ring clasp?
What Are Spring Ring Clasps? A spring ring clasp opens when you push back on a little lever that slides along a circular ring. … Spring ring clasps are commonly used to secure necklaces, bracelets, and anklets, but some people have a difficult time operating very tiny spring ring clasps by themselves.
What is a box snap clasp?
Box clasps have two parts a tongue and a box. … The tongue is squeezed and fits in the box and locks into place. Box clasps are often multi strand and may be used to connect two or more strands in a necklace or bracelet. Some of our box clasps are ornate and vintage stock.
How do you secure a necklace?
What does a lobster claw clasp look like?
How do you secure a necklace clasp?
- Collect all your strands into a bullet end or cone end, and create a wire loop to attach to the clasp of your choice. Bullet ends and cone ends work best for materials that you can knot securely or wrap with wire. …
- Collect all your strands into a cord end with loop and secure them there with glue.
Are magnetic jewelry clasps secure?
These magnetic clasps are both very secure and easy to use. They are an ideal solution if you have difficulties using clasps due to arthritis. The Magnetic Jewelry Safety Clasp will change any standard necklace, bracelet, or chain clasp to one with a magnetic clasp, making it simple and easy to close.
Do magnetic clasps work?
If you are creating your piece of jewelry with threads and knots these magnetic cylinder clasps work well because they are designed to hide knots. These are also nice for incorporating in a magnetic bracelet design. … Magnetic claw clasps are ideal for light-weight necklace closures but can be used in other jewelry.
What is a magnetic clasp?
Magnetic clasps are held together by very strong magnets. They are easy to hook together because the magnets are attracted to each other but they won’t come apart easily because the magnets are so strong. This ensures you will have beautiful, functional designs that will stay secure.
How do you make a parrot clasp?
How do you fix a parrot clasp?
What is a bayonet clasp?
Bayonet clasps are 2-piece spring loaded clasps that can be used with cord or metal chain. Bayonet clasps are very secure and easy to use. … The spring loaded feature keeps them locked together when closed. You can glue in cord and soft solder in metal chain.
What is a toggle clasp?
A toggle clasp consists of a metal bar that goes through a loop (usually circular) and keeps a necklace or bracelet closed.
What is a spring ring closure on a necklace?
Spring Rings are round tubes with a spring loaded lever on one side that opens and closes the clasp. … The part that opens and closes hooks into a jump ring or metal loop on the opposite end of the piece. If your piece is primarily chain at the ends, use clasps with open jump rings for connecting to the chain links.
What is the thing at the end of a necklace called?
A bail (also spelled bale) is a component of certain types of jewelry, mostly necklaces, that is used to attach a pendant or stone. The bail is normally placed in the center of the necklace where the pendant hangs. Some bails are made so a pendant can be attached after the necklace production is completed.
What is a hook clasp?
Fish hook clasps have a metal hook on one side and a delicate, oval-shaped (almost fish-shaped) metal box on the other. … These clasps can be quite fancy, even adorned with diamonds and other jewels, and they are usually used on classic pearl necklaces and other very elegant pieces.
What are the parts of a pendant?
bail The only technical part of all pendants is the bail. The bail is the part of metal that the chain feeds through. There are many different types, but can be broken down into four distinct categories: tube bails, clip-on bails, fixed bails and hidden bails.
Why is it called a lobster clasp?
Lobster clasps are named as such because of their pinching mechanism, and they are often shaped like a lobster’s claw.
What does a lobster clasp attach to?
Make Sure to Close the Jump Ring Lobster clasps usually attach to a jump ring, the small ring that can be connected to the opposite end of your jewelry piece. Often, new jewelry designers forget to close the jump ring directly onto the stringing material when they’re beading.
What is a ring clamp?
What is a ring clamp? Traditionally, ring clamps are used for holding rings while polishing or filing, though they can hold other items such as a piece of metal. They are braced against the bench pin with one hand to provide a secure and safe way to hold rings, and other items, whilst working on them.
How do necklace clasps work?
Each end of the metal clasp features a magnet. When the two ends are placed near each other, the magnets pull them shut. To open the clasp, you slide your fingernail between the two parts. These closures are usually made of base metal and are sometimes plated with precious metals.
