How do I build a bar countertop?
How do you make a curved bar top?
How much does it cost to build a bar top?
Building a patio bar costs $1,000 to $10,000 or more depending on whether it’s a wet bar or not. Putting a simple bar with a tabletop on it might cost $1,000 or less for the handy DIYer.
How do you make a bar top?
How wide should a bar top be?
between 12- to 16-inches wide Home bar tops are usually between 12- to 16-inches wide. Commercial bar tops vary from 20- to 28-inches in width, including a drink rail (or trough) on the server side of the bar.
What kind of wood should I use for a bar top?
Many experienced woodworkers consider walnut to be the best wood for bar tops due to its shock resistance and range of colors. Walnut can be golden, honey colored or medium to dark brown. Walnut bar tops can be satin-smooth with a muted grain or conversation pieces with prominent textures and knotholes.
What can I use for a bartop?
Wood. This is our favorite bar top material, for obvious reasons, and its long-standing status as top of the charts is a testament to how versatile, affordable, and long-lasting wood can be when treated correctly. Wood comes in a variety of species and colors, and can be further stained to create the look you want.
How do you build a bar rail?
How do you curve a bar?
What is the average bar height?
to 42-inch A bar-height table generally measures in the 40- to 42-inch height range. A counter-height table runs about 34 to 36 inches tall, and standard dining-height tables range from 28 to 30 inches tall.
How do you make a bar top out of plywood?
What tools do I need to build a bar?
Tools Required to Build a Home Bar:
- Compound Miter Saw.
- Circular Saw.
- Drill.
- Hammer.
- Finishing Nails.
- Nail Gun.
- Brad Nails 15-16 Gauge (Optional)
- Safety Glasses.
Does a bar add value to house?
Does a Wet Bar Add Value to a Home? According to Remodeling magazine’s cost-versus-value projection, a basement remodel with a home-based pub and bathroom is around 70%.
Is plywood good for a bar top?
When making a home or commercial bar top we always recommend using thick solid hardwood for the main bar top as it is more durable and longer lasting than a plywood top and can even be refinished.
How do you make a bar edge?
How do you seal an outside bar top?
How much overhang should a bar top have?
The bar top overhang should be a minimum of 8-1/2 and could be as much as 10 so your knees do not hit the bar front. For our extra tall customers the 10 overhang maybe necessary.
How much should a countertop overhang?
Generally, the standard overhang of a countertop is 1 to 1 inches from the cabinet, while the exposed ends of a countertop will usually have a inch overhang, and the ends that meet a wall don’t have any overhang at all to keep the fit flush to the wall.
How much room should be behind a bar?
How Much Space is Behind a Commercial Bar? There is roughly 3′ of space behind a commercial bar. It’s recommended that the width of this aisle be between 31 and 37. But if your bar is using barbacks, you should be on the larger end of that range.
Is polyurethane good for bar tops?
Keep a small jar of paint thinner and an old rag handy to wipe up small spills and to remove polyurethane from your skin. Apply polyurethane in a well-lit environment to allow you to see air bubbles, brush strokes and any specks of dust that fall on the surface.
Can PINE be used for butcher block?
For example, pine butcher blocks are less expensive but are not as durable as maple or other hardwoods and will need to be replaced sooner. Other considerations include the wood’s ability to conceal knife marks, the available thickness, whether it is harvested in a sustainable manner and the appearance.
How do you make a penny bar top?
How do you install rail molding on a bar?
How do you make a bar top out of hardwood floors?
Why should drinks be made on the rail of a bar?
Well drinks, also called rail drinks, are mixed drinks made with the lowest tier liquor that a bar stocks. … The well is the best place to keep the bar’s most commonly poured liquors because of its easy access, and a good bartender can whip up a well drink very quickly.
What are rails at a bar?
Any simple mixed drink made with low-cost liquor is considered a rail drink. Here are some of the most common rail drinks you’ll see at any bar: Rum and coke. Gin and tonic.
How do I build a tiki bar?
The base of the bar will be built in three separate sections and should be assembled in place.
- Cut Walls for Bar. …
- Cut Inner Shelves. …
- Cut Top and Bottom Pieces. …
- Assemble the Tiki Bar Sections. …
- Attach Bar Sections. …
- Measure and Cut Plywood for Countertops. …
- Install Countertops. …
- Attach Tiki Bar Posts for Roof.