Here’s how to childproof a dresser and keep other furniture from tipping over:

  1. Secure one anchor or bracket to the wall.
  2. Attach a second anchor or bracket to your piece of furniture.
  3. Link the two anchors with a tether (either a strap or cable provided in the kit) and adjust as needed to make sure it’s firmly attached.

When dresser drawers are opened, the center of gravity can quickly shift so that any weight (or height) of dresser can tip over even without a child climbing on it.

The dresser might have been heavy for the movers or the furniture delivery people. However, that dresser is still a hazard for a young child. When a child opens the drawers and climbs on them, even a heavy dresser or other type of furniture can fall on a child.

No, Dressers Don’t Need To Be Anchored To A Wall.

15 Effective Ways to Prevent Dressers from Tipping Over

  1. Check Consumer Report’s tip test.
  2. Strap or anchor the dresser.
  3. Lock the drawers.
  4. Talk to your kids about dresser safety.
  5. Keep heavy and desired objects off the top of the dresser.
  6. Keep it clean.
  7. Check the legs for stability.
  8. Follow written guidelines.

The most popular way to baby proof drawers is to use magnetic locks. The locking mechanism is hardware mounted inside the drawer. The mechanism will not unlock until you open it with a magnetic key. Magnetic locks will generally come in a pack consisting of one magnetic key and numerous locks.

Cover all sharp furniture edges and corners with bumpers or safety padding. Block all open outlets with furniture or use safety plugs. Latch closed any drawers, doors or cupboards within baby’s reach. Get rid of any blinds or curtains with looped cords, or install safety tassels and cord stops to tuck away the cords.

Between 2000 and 2019, 451 children under 17 were killed by furniture and TVs tipping over and crushing them, according to a recently released report by U.S. Consumer Product Safety Commission.

Bookcases, dressers, armoires and cabinets are all worthwhile candidates for anchoring so is any piece of furniture holding a TV. Consider, too, whether a piece of furniture has drawers, shelves or doors.

IKEA believes that the risk of tip-over incidents is reduced when chests of drawers and other select clothing storage units are properly attached to the wall. Virtually all dressers have the potential to tip, but Ikea’s have proved particularly hazardous, a USA TODAY investigation found.

Place a cold compress or ice pack on any bumps or bruises. Give acetaminophen or ibuprofen for pain if your child is alert. Let your child rest, as needed, for the next few hours. Watch your child closely for the next 24 hours for any unusual symptoms or behavior.

If your bookshelves are free-standing, they could easily fall over during a large earthquake, injuring anyone who happened to be adjacent, especially a small child. Don’t take that chance! Inexpensive metal L-shaped brackets are available at your local hardware store, and they’re easy to install.

Bookcases are a staple in most homes. However, they can be dangerous if they become unstable and topple over.

Here is what I recommend to help prevent furniture tip-overs from happening:

  1. Secure furniture to the wall. …
  2. Put cabinet locks on the drawers. …
  3. Don’t place items on top of dressers, cabinets, and TVs. …
  4. Keep furniture away from windows, where possible.

You can use plastic ties, steel cables, or Velcro straps to accomplish. Please note, you may have to drill or glue hardware to the back of the furniture. Be aware this method may not be sufficient for holding up furniture to the wall in the event of jostling, a natural disaster, or if the furniture is top-heavy.

Secure your TV with an inexpensive strap In most cases these straps connect to the mounting holes on your flat panel, and then you drill the other end into your furniture and/or the wall. Make sure you find a stud or use drywall fasteners, since regular screws will slide out of drywall pretty easily.

What Causes Tip-overs? Most injuries occur when unsecured furniture falls or tips-over. Many times a child pulls the furniture onto themselves. Other causes include children climbing the furniture or pushing it over on another child.

Safety of Those Accessing the Safe To prevent injury, manufacturer recommendations state that bolting the safe to the floor is critical to ensuring the safe and its contents (could be loaded firearms, knives, other dangerous items you don’t want falling out onto you) do not tip over onto someone.

  1. Step 1: Empty the drawer and remove the drawer from the dresser or cabinet, if possible.
  2. Step 2: Locate the center point of the drawer.
  3. Step 3: Drill a hole that will fit the lock shaft.
  4. Step 4: Remove the lock bolt and the O-ring then install the lock in the drawer.

The Best Cabinet Locks of 2021

  1. Secure Home Baby Safety Locks. …
  2. Jambini Magnetic Cabinet Locks. …
  3. The Good Stuff Child Safety Cabinet Latches. …
  4. Hurrise Magnetic Cabinet Lock. …
  5. Eco-Baby Child Safety Magnetic Locks. …
  6. Safety 1st Adhesive Magnetic Child Safety Lock System. …
  7. Wonder Kid Safety Locks. …
  8. Enovoe Magnetic Cabinet Locks.
  • Be familiar with the settings on your hot-water heater. …
  • Keep bathrooms locked or secured at all times. …
  • Know how to keep baby’s crib safe. …
  • Keep an eye out for heavy objects around the home. …
  • Be cautious around electricity. …
  • Don’t forget about window blinds. …
  • Create a small object tester. …
  • Use gates around stairs.

It’s a lot of work, but it can help prevent many childhood injuries.

Use magnetic locks The most popular way to childproof drawers is by using a lock. In recent years, magnetic locks have emerged as an effective solution to keeping your kitchen, bedroom, and bathroom drawers securely shut. A latch with a strong magnet is installed inside the drawer, which prevents it from being opened.

Drawers are most often locked with cam locks. … A word of caution on installing locks on any low-end wood product. Low-end wood products do not gain a great deal of security from a cabinet lock installation. The lock installed on wood products will only secure the cabinet to the extent that the wood protects it.

Use a drill and a wood drill bit slightly smaller in diameter than the screws which will hold the lock in place. Carefully drill the two holes that will receive the mounting screws. Place the lock onto the drawer and attach the lock to the drawer with the screws.

Burglars may try a number of methods to try and gain access to your home, including picking your lock. The most obvious signs your lock has been tampered with are visible dents and scuff marks around the key hole.